7
3.
Along the column of the grid you can touch anywhere in that column to change
the pressure UP or DOWN and change the profile then SAVE it to a new
memory location.
4.
Go to the TOP temps to change them and BOT/SPEED etc. to change those
values in the profile.
5.
In the future we will have a RUN mode that follows the profile when you press
the screen.
Setup Tab
This page is PASSWORD protected.
1.
Graph speed, this controls the ZOOM factor on the home page .
2.
Pre heat Min. this sets the min amount in % that the temps need to be at before
you can run a profile to keep from pressing at the wrong temp. set to ZERO to
turn it off.
3.
Factory Reset: this returns all setting to factory
