master mechanic 134453, Руководство пользователя

Страница: 15 / 29

15
ASSEMBLY AND OPERATING
INSTALLING A BATTERY IN THE DRILL
1. Remove the discharged battery (1)
from the drill by pressing downward on
the battery release button (2) and
sliding the battery backward until it is
removed from the drill handle (3)
(Fig. 3).
2. Slide the fully charged battery onto the
matching keys (4) in the drill handle
where the discharged battery has
been removed.
NOTE: Make sure the slots in the battery
are fully engaged with the mounting keys
in the drill handle. The battery release
button will “click” into place when the
battery is fully installed.
WARNING:
Do not immerse the
battery pack in water. Sudden cooling
could cause a hot battery to explode or
leak.
ON-BOARD SCREWDRIVER BIT
STORAGE
Convenient on-board screwdriver bit
storage (1) is provided on both sides of the
drill handle base (Fig. 4).
LED WORK LIGHT
The LED work light (3) will automatically
turn ON when the trigger switch (1) is
squeezed (Fig. 5). It will automatically turn
OFF when the trigger switch is released.
ADJUSTING THE TORQUE
Your drill is equipped with an adjustable
torque clutch for driving different types of
screws into different types of materials. It
also has a set
ting for “drilling”.
Fig. 3
!
Fig. 4
Fig. 5