Master Lock ML08EB, Инструкция по эксплуатации

Страница: 7 / 116

7
English
Troubleshooting Table
The Problem: Why It Is Happening: The Solution:
Red LED blinks
three times
Incorrect code or fingerprint
has been entered Verify the code and re-enter
or reprogram
Programming error
Red LED slowly blinks for
two minutes
An incorrect code or
fingerprint has been entered
five times Wait for two minutes or use
the override key to access
the safe
Red LED blinks once every
ten seconds Battery power is low Replace with four AA alkaline
batteries (do not
use rechargeable batteries
or any other type of
non-alkaline battery)
Cannot open the lid after
entering the code Batteries have reached
end of life Open using override key.
Replace with four AA alkaline
batteries (do not
use rechargeable batteries
or any other type of
non-alkaline battery)
After code entry, lid does
not open, backlights stay
on, then turn off, red LED
blinks three times Incorrect code entry Re-enter the code with
distinct key presses
Lid does not open when
using override key Gas strut has stopped
working Use a magnet to open the lid.
Turn unit upside down for lid
to open.
NOTE: Use caution
as contents may fall out.
Red LED blinks five times System error: power failure Replace with four AA alkaline
batteries (do not
use rechargeable batteries
or any other type of
non-alkaline battery)
Customer Service
:
masterlock.eu/safes