English
UNITED KINGDOM •
customer service
tel:
020 8247 9300
internet
www.clasohlson.co.uk
postal
Clas Ohlson Ltd, Aquilla House (First floor), 1 Becketts Wharf, Lower Teddington Road, Hampton Wick, Kingston Upon Thames, KT1 4ER
1
2
Ver
. 20210510
Security safe
Art.no 41-4210
Please read the entire instruction manual before using the pro-
duct and then save it for future reference. We reserve the right
for any errors in text or images and any necessary changes
made to technical data. In the event of technical problems or
other queries, please contact our Customer Services
(see address details on the back).
Product description
Programming the code lock
1. Press down the red button on the side of the battery holder.
2. The
PROCEED
indicator light will come on and you have
30 seconds to enter a code using the digit keys.
3. Confirm the code by pressing either button [
A
] or [
B
].
The code can be changed at any time by repeating
the steps above.
Opening the safe using the code
1. Enter your code.
2. Press [
A
] or [
B
]. The
READY
indicator light will come on and
you have 5 seconds to open the door.
• If the
LO-BAT
indicator lights, the batteries need to be
replaced. If the batteries are completely discharge or are
removed, the code will be saved in the memory for about
4 hours. After that the code will need to be reprogrammed.
• If the incorrect code is entered three times, the opening
mechanism will lock and the safe will not be able to be
opened until 5 minutes has elapsed.
• Never lock the keys or instructions to the safe inside the safe.
If the batteries die, the key will be needed to open the safe.
Wall or floor mounting
• The safe is prepared for mounting on a wall or in a floor.
Mounting holes are located on the bottom and in the back
of the safe.
• Ensure that there are no electrical wires or water pipes in
the wall or floor where you intend to drill/screw. Use an
appropriate type of fastener for the wall/floor material and
attach the safe securely.
Care and maintenance
Clean the product by wiping it with a moist cloth. Use only mild
cleaning agents, never solvents or corrosive chemicals.
Responsible disposal
This symbol indicates that the product should not
be disposed of with general household waste.
This applies throughout the entire EU and in the
UK. In order to prevent any harm to the envi-
ronment or health hazards caused by incorrect
waste disposal, the product must be handed in
for recycling so that the material can be disposed
of in a responsible manner. When recycling your product, take it
to your local collection facility or contact the place of purchase.
They will ensure that the product is disposed of in an environ-
mentally sound manner.
Specifications
Capacity
16 L
Size
5 x 25 x 25 cm
Weight
9.5 kg
1. Knob
2. Keyhole cover
Opening the safe for the first time
1. Slide the keyhole cover (2) up to uncover the keyhole.
2. Insert the supplied key and turn it anticlockwise while
simultaneously turning the knob clockwise and opening
the door.
Batteries
1. Remove the battery cover on the back of the door and
insert 4 x AA/LR6 batteries (sold separately).
2. Refit the battery cover and leave the door open.
