6
Connecting LED Light To A Controller
5.3
Connecting the LED light to the mains
Warning!
!
Make sure mains power is switched off.
Warning!
!
Do not connect or disconnect the controller with LED light under load.
!
Ensure the power cord and the controller cables do not touch any of the LED bars.
Using a daisy chain setup, a maximum of 50pcs LED lights can be connected to one controller.
The controller can dim the LED light from 0 to 100%.
• Connect the dimming cable to the dimming port on the first LED light.
• Use dimming cable (T-shape) to connect the dimming port of the following LED light.
• Repeat these steps to connect up to 50pcs LED lights.
!
Ensure the cord is not coiled and does not touch any hot surfaces.
!
Connect the cables according to local rules, safety regulations and electrical code.
!
Ensure external switching gear can cope with the inrush current of the LED fixture. Always use a
double pole contactor suitable for switching a capacitive load. Never use household timers to
switch the LED fixture!
VD-100 0-10V
Dimming Controller
OFF
Just for
0-10V
100%
30%
60%
90%
20%
50%
80%
10%
40%
70%
VQ-VD100
Power Output Controller
888
%
