4
Safety Precautions & Warnings
Warning!
Carefully read the warnings below before using or working with the product!
5
Installation
Warning!
Always adhere to the local rules and regulations when installing or using the LED light.
No.
1
2
3
4
5
6
2
1
2
1
1
Product Name
Model
Quantity
1.8m/6ft
1.5m
30cm/1ft
T-Shape
0-10V Dimming
Power Cord
Steel Wire Rope Hanger
1/8" Adjustable Ratchet Hangers
Octopus 800X/400X
800W/400W
1
Dimming Cable(optional)
VD100 Controller(optional, buy separately)
!
DO NOT connect to live power until installation is complete.
!
Do not open or disassemble the LED light. Opening or modifying the LED light can be dangerous
and will void the warranty.
Do not use the LED light when either the LED light or its power cord are damaged. Replace the
power cord only with original certified cords.
!
!
Modifications to the cords can lead to unwanted electromagnetic effects, which makes the product
not comply with legal requirements.
!
Do not expose the LED light to:
- (ambient) temperatures outside the specified range;
- dust and contamination;
- direct sunlight during use or HID light that could heat up the ballast.
!
Always disconnect the LED light from mains before performing any maintenance.
!
Always allow for a cool down period of at least 30 minutes before touching the LED bars. Touching
the LED bars when the light is lit or immediately afterwards can result in severe burns!
!
Do not use the LED light near flammable, explosive or reactive substances. Do not use sulfur
vaporizers or water misters.
!
The installation and use of the LED light is the responsibility of the end user. Incorrect use or
installation can lead to failure and damage to the LED light. Damage to the LED light and
electronic circuitry as a result of incorrect installation and use revokes the warranty.
!
!
Mounting and installing of the LED light may only be executed by certified service personnel, in
accordance with the applicable local laws and regulations.
*All the LED fixtures in this series can be installed according to the same instructions.
!
The installer is responsible for correct and safe installation.
!
Ensure the local cabling can support the voltage and current requirements of the LED light.
!
Avoid coiled cords and keep mains leads separated. This prevents electromagnetic interference.
!
Do not connect or disconnect the LED light under load.
!
Mount the system to something that can hold the weight of the LED light.
