3. Next, fit the seat and back pieces into the holes by matching the numbers.
Note: you
may have to force the knobs into the holes by movement or by a rubber mallet.
4. Finally take the final side and work the knobs into the holes on side 2. Take 4 screws
and place them in the 4 holes along the side. Hand tighten them until they hold.
Note:
Be Sure to Use the Pre-Drilled Holes!
Now carefully flip the chair onto the other side. If
side 1 falls off, do what you did with side 2, work the knobs into the holes on side 1.
Take the last 4 screws and hand tighten them in just like you did on side 2. Now that you
have all screws in, go back and tighten them the rest of the way creating a secure hold.
If done properly it should look like this.
Thank you for your Business!
If you have any questions please call us at:
1-800-574-7248
