Master-force 241-0438, Руководство оператора

Страница: 15 / 20

WARNING:
When servicing, use
only identical replacement parts. Use of
any other parts may create a hazard or
cause product damage. For more informa-
tion, call the toll-free helpline, at 1-866-
917-4374.
WARNING:
To ensure safety and
reliability, all repairs should be performed
by a qualified service technician. For more
information, call the toll-free help-line, at
1-866-917-4374.
WARNING:
Before cleaning or
performing any maintenance, the tool should
be unplugged from the power supply.
WARNING:
If the supply cord
is damaged, it must be replaced by a
specially prepared cord available through
the service organization.
GENERAL MAINTENANCE
Using compressed air may be the most
effective cleaning method. Always wear
safety goggles when cleaning tools with
compressed air. Periodic maintenance
allows for long life and trouble-free operation.
A cleaning, lubrication and maintenance
schedule should be maintained.
1. Avoid dropping or otherwise causing impact
to the tool and keep it from oil and grease.
2. Inspect the screws periodically. If the
screws loosen, tighten them immediately, to
avoid serious accident.
3. Clean all parts of the tool; clean dust and
debris from vents. Keep the tool clean, dry
and free of oil or grease.
4. Avoid using solvents when cleaning
plastic parts. Most plastics are susceptible
to damage from various types of commercial
solvents and may be damaged by their use.
Use clean cloths and mild soap to remove
dirt, dust, etc.
LUBRICATION
All of the bearings in this product are
lubricated with a sufficient amount of
high grade lubricant for the life of the
unit under normal operating conditions.
Therefore, no further lubrication is required.
STORAGE AND HANDLING OF
GRINDING WHEELS
When not in use, grinding wheels should
be stored carefully in a rack or box to
protect them from chipping or breakage.
All grinding wheels must be handled
carefully to prevent dropping and bumping.
Page 14
MAINTENANCE
TROUBLESHOOTING
PROBLEM
CAUSE OF THE PROBLEM
SOLUTION
The motor stops
running
Battery is depleted Charge the battery pack
The angle grinder
does not work
The switch is in the “ON”
position when attaching the
battery pack
Turn off the angle grinder first and
re-start the tool
The tool is running
slowly
The grinder wheel is worn out Replace the grinding wheel on the tool