background image

13

5.  The charger will communicate with the battery pack to evaluate the 

condition of the battery pack.

6.  The green LED lights on the charger will flash while the battery pack 

is charging. After charging is complete, the green LED will be on. The 

flickering red light indicates a defective battery or a bad connection 

between the battery and the charger.

7.  The battery pack will fully charge if left on the charger, but it will not 

overcharge.

LED FUNCTIONS OF CHARGER (Fig. 3)

CHARGING A HOT BATTERY PACk

If the battery pack is above normal temperature range, the red LED will 

illuminate and the green LED will be off. When the battery pack cools down 

to approximately 104°F (40°C), the charger will automatically begin charging.

CHARGING A COLD BATTERY PACk

If the battery pack is below the normal temperature range, the red LED 

will illuminate and the green LED will be off. When the battery warms to a 

temperature of more than 50°F (10°C), the charger will automatically begin 

charging.

DEFECTIVE BATTERY

If the charger detects a problem, the red LED will begin flashing and the 

green LED will be off. 
1.  If registering as defective, remove and reinsert the battery pack in the 

charger. If the LED status reads “defective” on second time, try charging a 

different battery pack.

2.  If a different battery pack charges normally, dispose of the defective 

battery pack (see Maintenance section).

LED INDICATOR

BATTERY 

PACk

RED 

LED

GREEN 

LED

ACTION

Hot/Cold 

battery

On

Off

Fast charge will begin when 

battery returns to 50°F (10°C) 

and 104°F (40°C).

Defective Flashing

Off

Battery pack or charger 

is defective.

Charging

Off

Flashing

Charging

Fully 

charged

Off

On

Charging is complete.

Содержание 241-0303





















Отзывы: