Specific safety rules for the scroll saw
WARNING:
Do not operate the scroll saw until it is assembled, and you have read and
understand the following instructions and the warning labels on the scroll saw.
Before operating
1.
Check for proper assembly and proper alignment of moving parts.
2.
Understand the function and proper use of the ON/OFF switch.
3.
Know the condition of the scroll saw. If any part is missing, bent, or does not operate properly,
replace the component before you use the scroll saw.
4.
Determine the type of work you are going to be doing. Properly protect your body including your
eyes, hands, face and ears.
5.
To avoid injury caused by pieces thrown accessories designed for this saw. Following the instructions
supplied with the accessory. The use of improper accessories may cause risk of injury.
6.
To avoid contact with rotating equipment:
•
Do not position your fingers where they could contact the blade if the workpiece should
unexpectedly shift or your hand should slip.
•
Do not cut a workpiece too small to be held safety.
•
Do not reach under the scroll saw table when the motor is running.
•
Do not wear loose clothing or jewelry. Roll long sleeves above the elbow. Tie back long hair.
7.
To avoid injury from accidental starting of the scroll saw:
•
Make sure the switch is OFF and unplug the power cord from the electric outlet before changing
the blade, performing maintenance or making adjustment.
•
Make sure the switch is OFF before plugging in the power cord to an electric outlet.
8.
To avoid injury from a fire hazard, do not operate the scroll saw near flammable liquids, vapors or
gases.
9.
To avoid back injury:
•
Obtain help when it is necessary to raise the scroll saw more than 10 inches (25.4 cm). Bend your
knees when lifting the scroll saw.
•
Carry the scroll saw by its base. Do not move the scroll saw by pulling on the power cord. Pulling
on the power cord could cause damage to the insulation or the wire connections resulting in
electric shock or fire.
240-0041
(888)315-3080
5
