Master Cut CJF-1001A, Руководство по эксплуатации

Страница: 16 / 21

After each use
What? How?
Clean the product. Cleaning the product
Lubricate the cutting tool.
Lubricate the cutting tool with a little
lubricating grease.
After the first five operating hours
What? How?
Change the motor oil. Draining the motor oil.
Every 25 operating hours or every 3 months
What? How?
Replace the air filter. Cleaning/replacing the air filter
Remove grass and dirt from rotating parts. Using a brush or another suitable blunt object.
Clean covers. Wipe down with a slightly damp cloth.
Every 100 operating hours or every 12 months
What? How?
Clean/replace the spark plug. Cleaning/replacing the spark plug
Change the gearbox/motor oil.
Draining the motor oil
Changing the gearbox oil
Cleaning the product
WARNING
Risk of injury!
Clean the cutting tool carefully. The cutting tool may still move even though the
product is switched off.
Careful handling and regular cleaning ensure that the product remains functional and efficient for
a long time.
Clean the product immediately after each use. Dried-on grass is extremely hard and difficult to
remove.
• Brush off coarse dirt.
• Wipe down the product with a slightly damp cloth.
• Never spray the product with water or expose it to water.
• Never use cleaning agents or solvents.
• Keep ventilation slots clean and free of dust.