Master Cut CJF-1001A, Руководство по эксплуатации

Страница: 15 / 21

WARNING
Risk of injury!
If there is a risk of slipping on slopes, the product is to be held by a second person
using a bar or a rope. The second person must stand above the product and
maintain an adequate distance from the cutting tool.
Always work across slopes, never upwards or downwards. Be especially vigilant
when changing direction.
WARNING
Risk of injury!
Do not clean the cutting tool while the engine is running. Switch off the motor and
remove the spark plug connector. Always use aids, e.g. a piece of wood for
removing jammed objects.
– Start the motor.
– Use the throttle to set the motor to the required speed.
– Press the coupling handle (1) and keep it pressed.
– Pull the coupling handle (15) and keep it pulled.
– Switch off the motor after completing the work.
Cleaning and maintenance
WARNING
Risk of injury!
Before any maintenance or cleaning work:
– Switch off motor.
– Allow the product to cool down.
– Disconnect the spark plug.
WARNING
Risk of injury!
Perform only the maintenance work described here yourself.
Any other work, especially motor maintenance and repairs must be performed by
a trained professional. Improper work can cause product damage and hence
physical injury.
Cleaning and maintenance at a glance
Before each use
What? How?
Check screw connections are tight.
Hand-tighten the screw connections using the
appropriate tool.
Check motor oil level. Checking the motor oil level
Check tyre pressure. Air pressure gauge.
Check cable of the pull-starter for damage. Visual inspection.