Master cook CLASSIC 500SRGG41328, Руководство пользователя

Страница: 5 / 23

• If necessary, ensure that you replace the hose to meet with
national requirements. (Always use hose-clips to secure the hose
to the regulator and BBQ).
If the connections for the gas supply are porous or faulty, the
barbecue must not be used. This also applies, for example, to
hoses or fittings that may have become blocked, as this can lead
to a dangerous flashback.
CAUTION! GAS DISPLACES OXYGEN
Liquid gas is heavier than oxygen. Therefore it settles on the
ground and displaces the oxygen at that level.
Possible consequences:
• Suffocation resulting from a lack of oxygen if the gas
concentration is allowed to rise sufficiently.
Do not use the barbecue unless it’s completely assembled and all
parts are securely fastened and tightened.
Never obstruct the ventilation openings of the cylinder
compartment.
Do not use power tools to construct this product.
Do not over tighten screws or bolts.
Do not sit or stand on the product.
Do not use this product if parts are missing,
damaged or worn.
Never use scourers, abrasive or chemical cleaners.
Never cover the entire cooking area.
Do not move the appliance during use.
Do not leave a lit barbecue unattended, especially keep children
and pets away from barbecue at all times.
Please refer to the parts list and assembly diagram as necessary.
Assembly of the barbecue involves many large components; it is
advisable to have two people assemble the unit.
Please use protective gloves when assembling this product.
To avoid losing any small component or hardware, assemble
your product on a hard level surface that does not have cracks
or openings.
To avoid damage to soft floor or carpet, do not assemble or
move the appliance on soft floor or carpet.
Follow all steps in order to properly assemble your product.
Make sure all the plastic protection rip off before assembling.
Do not force parts together as this can result in personal injury
or damage to the product.
When applicable, tighten all hardware connections by hand
first, once the step is completed, go back and full tighten all
hardware.
Please read these instructions carefully before assembly and
use.
Caution: Whilst every effort has made in manufacture of your
barbecue to remove any sharp edge, you should handle all
components with care to avoid accidental injury.
• DO NOT lean over the barbecue when igniting the gas flame.
• Close the valve on the gas bottle after each use: (Turn the valve
clockwise). Also turn off the control knobs (Turn knob fully
clockwise).
• Never leave the hot barbecue unattended. If the flame
extinguishes, relight immediately or cut off the supply from the
gas bottle.
• When connecting the gas bottle, ensure that there are no
ignition sources within a 5m radius. Take special care not
to light any naked flames, do not smoke or switch on electric
appliances (devices, lights, door bells), etc (sparkover possible).
• Before each use, check to ensure that all connections through
which gas is supplied are sealed and intact.
Assembly
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Check the pack and make sure you have all the parts listed.
During assembly children should be kept away from the product
due to possible risk of injury.
Ensure that this product is fully assembled as illustrated before
use.
Two people to assemble and lift.
Number of people required to assemble
Time to assemble
1.5hours
Tools required
not
supplied
5