Model no. 043-1297-6 | Contact us: 1-855-803-9313
5
4
TM
Descrip
tion of P
art
s
Ho
w t
o Use
Induction Cooker
Control Panel lock
Adjustment Buttons
Display Window
Adjustment Buttons
Timer Button with
indicator light
Temperature
Button with
indicator
light
On/Off Button
with indicator light
Power Selector
Button with
indicator light
Temperature
Power
Selector
indicator
lights
NOTE:
The coffee you get will be less than the water you have added, as some water is absorbed by
coffee ground.
1. Place the Induction Cooktop on a dry, level surface.
2. Add food to the cookware.
3. Place the cookware within the circular guide indicated on the Induction Cooktop.
NOTE:
1. Ensure that the bottom of the cookware is clean as dirt may cause the bottom to stick to the
Induction Cooktop.
2.
NEVER
heat empty cookware. This will cause the unit to overheat, damage the cookware and/
or cause the unit to shut off.
4. Plug into a 120 V outlet. The unit will beep and the Indicator Light above the On/Off Button will flash. An ‘L’ will
be appear in the Display Window indicating that the area in the cooking circle is cool if it is below 60°C/140°F.
Once you have finished cooking, press the On/Off Button and remove the pot. An ‘H’ will appear in the Display
Window if the area in the cooking circle is above 60°C/140°F. This is the residual heat from the cooking pot.
5. Press the On/Off Button to turn the unit on. The red Indicator Light above the On/Off Button will remain
illuminated.
6. Choose the desired function by pressing the Temperature or Power Selector Button. The corresponding Indicator
Light next to the Display Window will illuminate.
7. Press the ‘+’ or ‘-’ buttons to adjust the temperature or power accordingly.
8. Press the On/Off Button to turn the unit off when finished cooking.
NOTE:
1. If the cookware is removed from the induction cooktop at any time during the cooking cycle,
the unit will beep continually for 30 seconds, error code E1 will appear in the Display Window
and the unit will shut off automatically. In order to re-activate the unit, place cookware back on
the cooktop and follow steps 5 through 8.
POWER Function
The Power Function relates to the amount of wattage the cooktop uses. Low Power (wattage) results in low
cooking speed. As you increase the power the cooking speed is increased as is the wattage used.
While using this function, the temperature of the food is not being regulated, only the power being used is set. Use
the Power Function if a specific temperature is not required, to bring water to a quick boil or for quick browning,
frying and sautéing.
Press the On/Off Button to turn the unit on, then press the Power Selector Button once. The corresponding
Indicator Light next to the Display Window will illuminate and the default Power Selection of 1000W will appear in
the Display Window.
To adjust the power level, press the ‘+/-’ Buttons to select from the following 8 settings:
