Master Bilt CCR-23SF, Инструкция по установке и эксплуатации

Страница: 7 / 20

6
BASIC OPERATION
CCR-23SR
CCR-49DR
CCR-72TR
1. Plug in and turn on the power switch located on the bottom of the top grille right side.
The Display panel will be lighted and make a beep sound. The compressor will begin
to run.
2. The default temperature setting is No. “5”.
3. The compressor is automatically cycled by the electronic controller (PCB, D-Sensor).
4. The Defrost cycle is automatically controlled by the R-sensor and the PCB.
5. Set level toward “1” for higher temperature and toward “9” for lower temperature.
6. The interior light is activated by the rocker switch at the bottom of the top grille when
the door is opened.
7. Evaporator fan motor(s) will run after all doors are completely closed.
REFRIGERATORS