Master Bilt CCR-23SF, Инструкция по установке и эксплуатации

Страница: 16 / 20

15
1. REMOVE THE BOTTOM GRILL
** THE BOTTOM GRILL IS FIXED BY
LATCH, SO YOU CAN REMOVED IT BY
HANDS.
2. REMOVE THE TOP GRILL
** THE TOP GRILL IS FIXED BY SCREWS,
SO YOU NEED SCREW DRIVER.
3. REMOVE THE GRILL CAPS FROM TOP
GRILL AND BOTTOM GRILL
4. DISCONNECT THE HEATER WIRE
FROM MAIN HARNESS (IS LOCATED
AT SWITCH BOX) AND REMAIN WIRE
CONNECTED TOGETHER(WCR-23SF)
5. UNSCREW THE BOLTS AT THE TOP
HINGE(3POINTS)
6. REMOVE THE DOOR ASSEMBLY
** CAUTION DAMAGE OF THE HEATER
WIRE WHEN YOU REMOVE THE
DOOR (WCR-23SF)
7. UNSCREW THE BOLTS AT THE
BOTTOM HINGE(3POINTS)
8. SUBSTITUTE THE POSITION OF LEFT
GRILL FIXTURE AND RIGHT GRILL
FIXTURE
9. USE BOLTS FOR FIXING THE TOP HINGE AT BOTTOM LEFT SIDE
10. SET UP THE DOOR AT THE TOP HINGE AFTER ROTATING THE DOOR
11. PULL OUT THE HEATER WIRE FROM THE BUSH HOLE (WCR-23SF)
12. USE BOLTS FOR FIXING THE BOTTOM HINGE AT TOP LEFT SIDE
13. CONNECT HEATER WIRE TO THE MAIN HARNESS (IS LOCATED INSIDE THE TOP
GRILL AND IT IS CONNECTED TOGETHER) (WCR-23SF)
14. ASSEMBLE THE GRILL CAP TO TOP GRILL AND BOTTOM GRILL AT RIGHT SIDE
15. SET UP THE TOP GRILL BY SCREW
16. ASSEMBLE THE BOTTOM GRILL
GRILL * T
TOP HINGE
HINGE
SHAFT
HEATER WIRE
UNDER
HINGE
GRILL * U
DOOR
ASSEMBLY
GRILL CAP
GRILL CAP
PART DIAGRAM
INSTALLATION METHOD OF REVERSE DOOR