Amate Electroacústica,s.l.
MA210/MAW215.Version 1.11
Feb 09
8
With this geometry we avoid stationary waves within the upper and lower sides of the
enclosure and we reduce cancellations on the total frequency response of the
system.
2.2. 10" Neodymium Woofers with Phase-Plug
The low-mid way includes two 10" Neodymium woofers, with 2.5" voice coil and with
copper ring to align the impedance. This woofer is the perfect ratio between a wide
response and a small-sized transducer. We achieve an optimum performance on the
frequency range of the voice.
Each loudspeaker is coupled to a phase plug. We widen the frequency response on
the "higher" mid range and increase the total sound pressure level through its
radiation areas.
2.3.1" Compression drivers with waveguide
The high frequency way includes two 1" compression drivers coupled to planar
waveguides. Thanks to their Pure Titanium 44mm diaphragm we achieve an
extremely good and clear sound, better than any other option.
The accurate design of our waveguide transforms the spherical waves produced by
the driver into planar waves, while transversal stationary waves are also avoided
within the audio field (up to 20kHz).
2.4.Finish
In its continuous research into offering the best product at all levels, the
MA-210
has
been made of vibration and moisture-resistant birch plywood. All cutting and milling
work, as well as drilling operations, has been developed by computerized numeric
control machinery (CNC) which allows us to assure perfect and accurate assembly.
The black finish, which uses totally ecological water-based acrylic resin paint, provides
an excellent external protection.
We also include a 2mm black painted steel grille with transparent foam on the front
side.
Each unit incorporates rigging on its side for safe, easy and quick flying or stacking.
2.5. MA-210/D7 System
D=DSP version of
MA-210
with independent amplification on each way and internal
processing through DSP included.
The
Class D
amplification modules are
1000 W
for the low way and
500 W
for the high
way. Their high efficiency (almost 90%) allows their location on the rear panel .
The DSP control software allows:
