Amate Electroacústica,s.l.
MA210/MAW215.Version 1.11
Feb 09
13
Fig.12.
4x
MA-210/D7
Connections
5.FLYING SYSTEM
Flying an
MA
system is easy, fast and secure. To perform any operations related to
flying the system, read the present document, and act on the warnings and advice
given.
Only experienced installers with adequate knowledge of the system and local safety
regulations should fly speaker cabinets.
It is the user's responsibility to ensure that the systems to be flown and the flying
accessories (such as chains, eyebolts, lock pins...) comply with state and local
regulations. They should be regularly inspected and replaced if in doubt.
When flying enclosures from ceiling support structures, extreme care should be taken
to assure the load bearing capabilities of the structures. Do not fly systems from
unsafe structures.
All flying accessories that are not supplied by
Amate Electroacústica
are the user's
responsibility. Use at your own risk.
Remember that no risks should be taken with regards to public safety.
5.1.Description
Each
MA-210D7
cabinet includes two structures on each side of the enclosure, one
on the front-lateral side and the other on the back-lateral side. These structures are
manufactured from 3mm stainless steel; they are affixed to an internal plate with
special crop resistant screws. There is a guide (front guide) assembled on the front-
lateral structure (which is used to vertically join the cabinets); a second guide (back
guide) assembled on the back-lateral structure is used to vertically join the cabinets
and to tilt them.
