PRODUCT SHEET
13
“HEIDI” bathtub 150x70x50 H cm:
E’ realizzata in CRISTALPLANT e MAK LUX.
The bathtub is made in CRISTALPLANT. It is a compact non-porous material
consisting of a high percentage of natural hydrated aluminium oxide mineral filler and a
low percentage of polyester acrylate resin. It is a strong, hygienic material that is
pleasant to the touch and is particularly suitable for making washbasins, shower trays
and bathtubs. The bathtub weighs 90 Kg empty and 340 kg filled with water up to the
overflow. Its capacity is 2,50 hl up to the overflow.
Daily cleaning:
To keep the CRISTALPLANT surface clean, just wipe over with a damp cloth soaked
with common household gel or cream detergents or detergent solutions. Lastly take
care to rinse the bathtub surface thoroughly.
Avoid using solvent-based or particularly aggressive products such as ammonia,
turpentine, trichloroethylene, thinners, etc.
Maintenance:
In the case of: SURFACES WITH DULL AREAS, HALOS OR SMALL ABRASIONS
These marks may be easily eliminated by thorough cleaning with an abrasive detergent
and a Scotch Brite sponge (reg. 3M trademark).
In the case of: SURFACE SCRATCHES
Proceed as above using detergent and the Scotch Brite sponge. If the scratch is still
visible, use emery paper, first wet and then dry.
In the case of: DENTS AND DEEP SCRATCHES
Some severe damage can be fully repaired. Contact Mastella and explain the type of
problem that has arisen to assess whether repair is possible or not.
