Safety Information
1,TO REDUCE THE RISK OF FIRE, ELECTRICAL
SHOCK, DAMAGE TO THE INSTRUMENT OR
PERSONAL INJURY, PLEASE FOLLOW THE
SAFETY INSTRUCTIONS DESCRIBED IN THE
USER MANUAL.
2,TO ENSURE SAFE OPERATION AND LIFE OF
THE METER, DO NOT PLACE THE METER IN
ANY ENVIRONMENT WITH HIGH PRESSURE,
HIGH TEMPERATURE, DUST, EXPLOSIVE GAS
OR VAPOR.
WARNING:
01
02
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This instrument from Mastech Tools Inc. will be free from
defects in workmanship and material for three years from
the date of original purchase. This warranty does not
cover defects resulting from damage caused by the user
such as drops, neglect, misuse, unauthorized alteration,
usage outside of specified conditions, contamination, or
improper repair/maintenance. To receive service on the
instrument if it becomes necessary during the warranty
period, contact your nearest Mastech authorized service
center at 8190-1600 or visit www.p-mastech.com
to obtain a return authorization .
A return authorization is necessary before returning any
instrument to Mastech; no service will be provided without
a return authorization.The user is responsible for properly
packing the unit and charges such as shipping, freight
and insurance charges.The extent of Mastech's liability is
limited solely to the repair/replacement of the instrument.
The above warranty in its entirety is inclusive and no other
warranties, written or oral, are expressed or implied.
Safety Symbols
01
Note-Important safety information,
refer to the instruction manual.
Conforms to UL STD. 61010-1, 61010-2-032,
61010-2-033; Certified to CSA STD C22.2
NO. 61010-1, IEC STD.61010-2-032,
61010-2-033
Complies with European (EU) safety
standards
Earth (ground) TERMINAL
Caution when testing on live conductors.
Equipment protected throughout by double
insulation or reinforced insulation.
Application around and removal from
UNINSULATED HAZARDOUS LIVE
conductors is permitted.
Direct current
Alternating current
CAT III:
Applicable to test and measuring circuits connected to
the distribution part of the building's low-voltage MAINS
installation.Example:fixed equipment switchboards,circuit
breakers,wiring,including cables,bus bars,junction boxes,
switches,sockets,utput terminals on devices for industrial
use and other equipment.
