Masspower SUN-1000GTIL2-LCD, Руководство пользователя

Страница: 2 / 16

Why we produced the GTI-L --- It is in response to the overwhelming clamor from our
customers for a product that can control the amount of power that the grid tie inverters
(GTI) can generate so that the amount of excess power produced by the solar panels
are
reduced to insignificant levels, if not eliminated --- because in some countries,
the producer pays for the excess power it gives to the distribution grid. This
is because the electric power meters (the one provided by the electricity provider in the
area) are not aware of the direction of power flow. In other words it only adds even if
power is exported to the grid, thus, the consumers will be charged for power even if it is
given to the grid, and this is the problem
This is the 2
nd
generation GTIL of Masspower.The first generation GTIL must be used
with an additional limiter module,we also add an switch button to enable the inverter
either can work
at limit mode or at normal grid tie mode. With the 2
nd
generation GTIL,we integrated the
limit function inside the GTI-We call this internal limiter.In this way,No additional limiter
module is needed,reduced customer
’
s cost,more easier for installation.But in case
customer install inverter far away from the main circuit breaker,we also enable the 2
nd
GTIL work with stand-alone limiter,we call this-external limiter.For sure,the inverter can
work under normal Grid tie-no limit mode,just set on the nice LCD and save your setting.