![background image](http://html.mh-extra.com/html/massoth/dimax-8130001/dimax-8130001_manual_1735991016.webp)
1.2.
Summary of Functions
•
DiMAX bus terminal to connect the Massoth PC Module for
updating.
•
XpressNet
®
bus terminal to connect central stations that are
working according to the XpressNet
®
protocol, e.g. Lenz.
•
LOCONET
®
bus terminal (presently not activated) to connect
central stations that are working according to the LOCONET
®
protocol, e.g. Uhlenbrock.
1.3.
Scope of Supply
•
Multi-RC Receiver
•
Antenna
•
1 x Bus Cable
•
Manual
2.
Hook-Up and Operational Modes
Slide the antenna into the hole on the right upper side of the receiver
body before starting up the DiMAX RC Receiver.
2.1.
Hook-Up for XpressNet
®
To connect the RC Receiver to the Central Station use the supplied
20ft cable with phone-style connectors. Use the middle connector to
connect the receiver to the central station. Do not mix-up the
connectors. This may lead to severe damage to the receiver as well
to the central station. Wrongful handling by the customer voids any
and all manufacturer's (Massoth Electronics) liabilities.
For the operation with older central stations you may need an adapter
(Lenz-itemnumber LY006).
15 DiMAX Multi-Funkempfänger / Multi-RC Receiver –
8130001