5
Assembly Instructions
Tools required for assembly:
Phillips screwdriver
Step 1:
Attach the drip tray bracket (2) to the body (1) using 4pcs M6 x 12mm long screws (a) and 4pcs fibre washer
ф
6.4 × 14.5 (b) and 4pcs M6
nuts (c).
1
2
a, b, c
Step 2:
Loosen the screws(A), then attach the body bracket (3) to the body(1), then tighten the screw A (4 places), repeat on the RH side.
1
A
Step 3:
Install drip tray assembly. This step requires: drip tray 1pcs; drip tray handle 1 pcs; screw M4*8 philips pan head x 2pcs (these screws are
located in the handle).