10
Screw SS M6*12
Big fibre washer
14
15
11. Loosen the 3 Screws (b), remove the 4th & 5th screws, then assemble the Inner Panel (33) and Side shelf (16) to the appliance with
5pcs Screw (SS) M6*12 (b). Level the top of the table and secure.
If the timer knob is not fitted then, fit one knob (15) on the shaft of the timer on the side table. Refer to the timer section for correct
operating procedure.
15
Screw SS M6*12 (b)
16 (b)
33
4th & 5th
FOR 4 BURNER BBQS ONLY
12. Assemble the hood and Body assembly (14) to the cabinet trolley with 4pcs Screw (SS) M6*12 (b) and 4pcs fibre washer (c)
from the fastener kit.
If the knobs are not fitted to the body, then assemble 5pcs knob (15) to the valve shaft on the Body assembly, and make sure the red
point on the knob is on the upper direction.
Note: some 4 burner BBQs do not have a timer fitted.
Screw SS M6*12
Big fibre washer
14
Timer if fitted. Refer to the Timer section
for correct operating procedure
