X100M1.1ENG
X
100M User manual
13/13
However, in order to avoid shock or hurt risks, you should follow carefully the instructions
indicated in this manual and in the following notes:
•
Never open the case. Removal of rear grid or the frame from cabinet exposes the
operator to dangerous voltages and high temperature parts. Please refer to
qualified personnel to any maintenance operation.
•
Never unscrew any screw from the device.
•
Avoid use or storage in presence of rain, water sparks, high temperature and/or wet
atmosphere, water or chemical vapours, excessive dust or any other material which
can penetrate the case from air cooling apertures.
•
Don't close air cooling grids on the top and on the rear. Leave free space on the top
and on the rear for free air circulation.
•
After many hours of uninterrupted functioning , top air grid could become hot. Even
if temperature does not reach dangerous values, avoid to touch it.
•
Don't enter any metal or isolated part inside air cooling grids.
•
Never use X100M without rear protection grid.
•
Use only proper jacks and plugs in the sockets of the amplifier.
•
Don't espose X100M to excessive vibrations during the funcitoning.
•
After a storage at very low temperature, if you will play in a wet/humid warm
ambient please wait for at least 30-40 minutes before switch the amplifier ON.
•
Use only good mains cables and never cut protective earth connections.
•
Check mains voltage indicated on the rear of the amplifier
•
Disconnect the device from mains in case of use during thunderstorms.
•
IF HV and/or mains fuses blow not related to extraordinary events as thunderstorms
or violent mains variations, don't attempt to replace more than once fuses and
contact qualified personnel.
•
Dont' force pots and switches.
•
Never replace internal fuse and refer to qualified personnel.
Technical specifications.
Power supply: 230V
±
10% 50Hz or 115V
±
10% 50-60Hz, factory set
Max power consumption: 600VA
Input impedance: 1M
Ω
.
Output power: nominal 100W rms
Output impedance: 4-8-16 ohm
Tubes: seven ECC83/12AX7, four E34L/EL34 or four 6L6.
Ambiental conditions: 10-40°C, 30-90% humidity with no frost
Dimensions: 680(W)X280(D)X250(H) mm;
Weight: 24.5 kg
Contacts.
Masotti Guitar Devices Via C. Battisti 107– 01010 Farnese (VT) Italy.
URL:
www.masottiamp.it
For info: e-mail
