Masotti X100M Скачать руководство пользователя страница 12

X100M1.1ENG

 

 

X

100M User manual      

12/13

 

Warranty. 

Warranty is lifetime for the hardware ( tubes not included) except these parts: connectos, 
switches and pots. These parts have 24 months warranty from purchase date. 
Preamp tubes have 6 months warranty from purchase date. 
Final tubes have 3 months warranty from purchase date. 
Warranty is not valid if the amplifier is opened by not qualified personnel or  partially  
modified. 
Masotti Guitar Devices does not have any responsibility for damages to  humans, animals 
or things caused by a manumission or an improper use of the device different from the 
description of this manual. 
 
 

Versions and customisations  

X100M is available in two main versions, Modern and Classic, different for sound but 
identical for controls and general circuitry. It is possible to customise a lot of functions and 
sound aspects (MIDI switched dual master, parallel loop etc.) , so you can contact us for 
explain your needs. In this manual a special "Black crocodile" version is shown. It's 
possible also customise  cover as shown in the following pictures. 
 
 
 
      

Standard cover and knobs for Classic version 

      Standard cover and knobs for Modern version 

    

       

 

 

                 "Red crocodile" custom  version 

                      "Blu" version with MIDI customised mods

 

   

  

 

 

WARNING: don't replace final tubes with different type. If your X100M is delivered 
with E34L, never replace them with 6L6 and vice-versa.   

 
Important safety warnings 

X100M is projected and engineered to comply to EU safety and electromagnetlical 
compatibiliy   CEI EN 60065, EN 55103-1 and EN55103-2. CE mark indicates the 
compliance. Furthermore, even if ambient policy of MGD limits at the minimum the use of 
potentially polluting components, according to current EU laws customer must waste this 
device in special sites. 

Содержание X100M














Отзывы: