Masibus UT-94, Руководство пользователя

Страница: 17 / 25

UNIVERSAL TRANSMITTER UT-94
REF NO: m98A/om/101
Issue NO: 15
User’s Manual Page 17 of 25
11. Modbus Detail:
The table show Analog data to be transmitted and its sequence.
11.1 Configuration parameter Read
– write.
Sr. no Analog Parameters
Absolute
Address
Type of
Access Parameter
Type
Values
Applicable
1. Set point for relay1 40001 Read/write Int
2. Hysteresis for relay1 40002 Read/write Int 0 - 100
3. Set point for relay2 40003 Read/write Int
4. Hysteresis for relay2 40004 Read/write Int 0 - 100
5. I/P type 40005 Read/write Int 1 To 18
6. I/P zero 40006 Read/write Int
As per Input
Range
7. I/P span 40007 Read/write Int
As per Input
Range
8. Decimal point 40008 Read/write Int 0 - 3
9. Engineering Units 40009 Read/write Int 1 To 3
10. I/P Lo (For I/P type: mV, Pot) 40010 Read/write Int -10 to 500
11. I/P Hi (For I/P type: mV, Pot) 40011 Read/write Int 0 to 2000
12. O/P type1 40012 Read/write Int 1 To 5
13.
O/P Z (% of O/P Zero) of O/P 1
for scaling
40013 Read/write Int 0-300
14.
O/P S (% of O/P Span) of O/P 1
for scaling
40014 Read/write Int 700-1000
15.
O/P Lo (% of O/P Zero range) for
O/P1
40015 Read/write Int 0-250
16.
O/P High (% of O/P Span range)
for O/P1
40016 Read/write Int 750-1000
17. Open sensor for O/P1 40017 Read/write Int 1 To 2
18. Direction for O/P1 40018 Read/write Int 3 To 4
19. O/P type2 40019 Read/write Int 1 To 5
20.
O/P Z (% of O/P Zero) of O/P 2
for scaling
40020 Read/write Int 0-300
21.
O/P S (% of O/P Span) of O/P 2
for scaling
40021 Read/write Int 700-1000
22.
O/P Lo (% of O/P Zero range) for
O/P2
40022 Read/write Int 0-250
23.
O/P High (% of O/P Span range)
for O/P2
40023 Read/write Int 750-1000
24. Open sensor for O/P2 40024 Read/write Int 1 To 2
25. Direction for O/P2 40025 Read/write Int 3 To 4
26. Open sensor for relay1 40026 Read/write Int 1 To 2
27. Relay control logic for relay1 40027 Read/write Int 1 To 2
28. Configure alarm for relay1. 40028 Read/write Int 1 To 3
29. Latch for relay1 40029 Read/write Int 1 To 2
30. Open sensor for relay2 40030 Read/write Int 1 To 2
31. Relay control logic for relay2 40031 Read/write Int 1 To 2
32. Configure alarm for relay2 40032 Read/write Int 1 To 3
33. Latch for relay2 40033 Read/write Int 1 To 2
34. Slave ID 40034 Read/write Int 1 - 247
35. Baud rate 40035 Read/write Int 1 To 3
36. Digital filter 40036 Read/write Int 0 - 60
37. Password 40037 Read/write Int -1999 - 9999
38. Square root 40038 Read/write Int 1 - 2
39. Time out from the menu 40039 Read/write Int 10 - 300
Note: The values for above configuration parameter are as follows: