Masibus PCE-MCA 50, Руководство пользователя

Страница: 6 / 85

General
warnings
WARNING
It is dangerous to ignore the specified limits
for the instrument or its related accessories.
Do not use the instrument or accessory if it is
not in its normal condition.
Use the applicable protection and obey all
safety precautions.
Do not use the instrument in locations with
explosive gas, vapor or dust. There is a risk
of an explosion
Electrical
warnings
To prevent electrical shocks or damage to the
instrument, do not connect more than 30V
between the terminals, or between the terminals
and the ground.
This instrument uses a Lithium-Ion battery pack.
To prevent an explosion or fire, do not short
circuit, do not disassemble, and keep it safe
from damage. For operating conditions, see
section 6.1 on Page-85
To prevent battery leakage or heat generation,
only use the battery charger in the temperature
range 0 to 45°C (32 to 113°F). For operating
conditions, see section 6.1 on Page-85.
To make sure the display shows the correct
data, disconnect the test leads before you set
the power to on or change to another measure
or source function.
Cautions To prevent damage to the display, do not use
sharp objects on the screen.
Before you start an operation or procedure in this
publication, make sure that you have the
necessary skills (if necessary, with qualifications
from an approved training establishment). Follow
good engineering practice at all times.