Mash TT40 Cafe Racer, Руководство пользователя

Страница: 37 / 52

37
Retaining nut B
Throttle control
First, check whether the throttle control line is deformed, twisted or damaged
Then, measure the throttle bar free
stroke. Turn the bar to lean it against
one side of the free stroke, and draw a
straight line between the bar and the
balance weight with a mark pen, and
then turn the bar to lean it against the
other side of the free stroke; measure
the distance the straight line staggers,
i.e. the throttle bar free stroke.
Adjusting methods :
Fine adjustment:
Free stroke 2-6mm.
Retaining nut A
Pull open the rubber lagging, unscrew the retaining nut A, and turn the adjusting
solenoid to adjust to a satisfied free stroke. And then screw up the retaining nut
A and mount the protective rubber lagging.
Coarse adjustment: If the fine adjustment is not satisfying, separate the throttle
control line with throttle valve body and unscrew the retaining nut B to make
adjust the free stroke in a larger range. Screw up the retaining but B after the
adjustment.
Check whether the throttle can turn smoothly from full open to full close at any
position. If there is clogging, adjust or replace it.
Warning
Use not full throttle to the free stroke motorcycle is a dangerous operation,
rotating the handle, not full throttle to the free stroke can make the engine
speed increases suddenly.