Mash Dirt Track 650, Руководство пользователя

Страница: 42 / 69

38
6. Throttle
Inspect the throttle cable for deformed, twisted or damaged locations
along the cable length.
Measure the throttle free-play. Tum the throttle against one side of the
free stroke, and draw a straight line between the bar and the balance
weight. Then turn the bar to lean it against the other side of the free
stroke; measure the distance of the straight line, i.e. the throttle bar free
stroke.
Free-play: 2-6mm .
If the throttle free-play is insufficient or too large, make adjustments as
necessary.
Fine adjustment:
Move the rubber lagging to expose the adjuster. Unscrew the retaining
Nut A, and turn the adjuster until free-play is within specification. Tighten
the retaining Nut A and re-install the protective rubber lagging.
Adjusting methods:
Coarse adjustment:
If the fine adjustment is not sufficient, remove the throttle cable from the
throttle body and unscrew the retaining Nut B to increase the free-play.
Tighten the retaining Nut B after the adjustment.
After all adjustments, verify the throttle can turn smoothly from full open
to full close at any handlebar position. If there is any impediment to
turning the throttle smoothly, adjust or replace the throttle or cable.
Warning
Too much or too little throttle free-play or operating the motorcycle
with throttle impediments is very dangerous and can result in sudden
acceleration and/or loss of control of the vehicle.
Retaining nut A
Retaining nut B