Mash Dirt Track 650, Руководство пользователя

Страница: 22 / 69

18
3. Switches on Left Handlebar
The left-hand switch features the following controls:

Hi and Low beam Operation
:
：
At this position, the headlight comes on and the light is
beaming at a short distance. (The headlight will not come on if the
ignition switch is not turned on.)
：
At this position, the headlight comes on and the light is
beaming at a far distance. (The headlight will not come on if the
ignition switch is not turned on.)

Directional Indicator
Use the direction indication switch when turning left or right. If the
main switch is in the run position, the direction indicator will flash
when slid to the left or right. Pressing the center of the direction
indicator will stop the turn signal from flashing.
Caution
·
when finished turning, the direction indicator switch will not be
back to original position automatically, please switch it manually.
· Driving with light on will obstruct traffic.

Horn button
When the main switch is in the "on" position, if you press the
horn button, it will emit a loud sound.

Overtaking lamp switch
Pull the yellow button inward to light both headlights indicating to
the vehicle in front of you, your intent to overtake.

ABS off switch
The mode of ABS state switching is cyclic switching, and the
order of cyclic switching is:
Front and rear ABS are fully opened - front ABS is opened,
Rear wheel is closed -ABS before and after full opening - ABS before
and after.
Horn
Butto
n
ABS Off Switch
Hi and Low beam
Operation
Overtaking lamp switch
Directional Switch