Maserati Touch Control Plus, Руководство пользователя, Страница: 113 / 124

transmission shift lever is in R
(Reverse) and the vehicle speed is less
than 12 km/h (7.5 mph). The system
can be enabled with “Sound” only,
“Sound + Display”, or turned “Off”.
Front Sensors Active in Drive
If this feature is active, when driver
takes shift lever to D (Drive), only the
front parking sensors are activated.
This feature is useful when driving in
line to prevent that any vehicles
behind are detected by the rear
parking sensors.
Front Park Assist Chime
Volume
When this feature is selected, the
chime volume of front park assist
sensors can be set to “Low”,
“Medium” or “High” level. “Medium”
is the default setting. The system will
retain its last known configuration
state through ignition cycles.
Rear Park Assist Chime Volume
When this feature is selected, the
chime volume of rear park assist
sensors can be set to “Low”,
“Medium” or “High” level. “Medium”
is the default setting. The system will
retain its last known configuration
state through ignition cycles.
Tilt Mirrors In Reverse
By selecting this feature the outside
side-view mirrors will tilt downward
when the ignition is in
RUN position
and the transmission shift lever is in R
(Reverse) position. The mirrors will
move back to their previous position
when the transmission is shifted out of
R (Reverse). The feature can be set
“On” or “Off”.
Blind Spot Alert
When this feature is selected, the
Blind Spot Alert (BSA) feature can be
set to “Off”, “Led” or “Led + Chime”
(default mode). When this feature is
activated in “Led” mode, the system
will only show a warning light in the
outside mirrors. When “Led + Chime”
mode is activated, the system will
show a warning light in the outside
mirrors as well as give an audible alert
when the turn signal is on. When
“Off” is selected, the system is
deactivated.
Surround View Camera Delay
When activation occurs by pressing
the “Surround View” button in the
“Controls” screen, the initial view will
be the default view (associated with
current gear state). Image will be
displayed while in that gear as long as
vehicle speed remains less than
12 km/h (8 mph). When vehicle is
shifted into a different gear, the
image will remain displayed for 10
seconds or until vehicle speed exceeds
12 km/h (8 mph), at which point it will
immediately cancel and return to the
last viewed screen. The feature can be
set “On” or “Off”.
Surround View Camera
Guidelines
When this feature is selected, moving
the shift lever in R (Reverse) position
or pressing “Surround View” soft-key
on MTC+ display appear active
guidelines over the surround view
camera display. The feature can be set
“On” or “Off”.
Rearview Camera
This vehicle can be equipped with a
rear parking camera which allows to
see an image of the rear surroundings
of your vehicle whenever the shift
lever is set in R (Reverse). The image
will be displayed on the MTC+ display
along with a caution note to check
entire surroundings. The feature can
be set “On” or “Off”.
MTC+ Settings
9
113