Maserati MC20 2022, Руководство пользователя

Страница: 48 / 288

2
44
Understanding the Vehicle
stem cap. This will prevent moisture
and dirt from entering the valve
stem and damage the TPMS internal
sensor.
NOTE:
• Driving on a significantly
underinflated tire causes the tire to
overheat and may lead to tire failure.
Under-inflation also reduces fuel
efficiency and tire tread life, and may
affect the vehicle’s handling and
stopping ability.
• The TPMS is not a substitute for
proper tire maintenance, and it
is the driver’s responsibility to
maintain correct tire pressure using
an accurate tire pressure gauge, even
if under-inflation has not reached the
level to trigger illumination of the
TPMS light
.
• Seasonal temperature changes will
affect tire pressure, and the TPMS
will monitor the actual tire pressure
in the tire.
Premium System
The TPMS system uses wireless
technology with wheel rim mounted
electronic sensors to monitor tire
pressure levels. Sensors mounted to
each wheel as part of the valve stem
transmit tire pressure readings to the
receiver module.
The TPMS consists of the following
components:
• receiver module;
• four TPMS sensors;
• various TPMS messages, which display
on the instrument cluster;
• warning light .
Tire Pressure Low Warning
The TPMS light will illuminate in
the instrument cluster and an acoustic
signal will notify that tire pressure is
low in one or more of the four tires.
The instrument cluster will also display
a pop up in the right area reporting
the pressure values of each tire with
flashing low pressure value. A pop
up message will also appear below
the car image, reporting a "Low Tire
Pressure".
Should this occur, you should stop
as soon as possible and inflate the
tire/s with the low pressure (the
one/s flashing in the instrument
cluster graphic) to the recommended
cold pressure inflation value. Once
the system receives the updated
tire pressure value, the system will
automatically update, the graphic
display in the instrument cluster will
stop flashing, and the TPMS light will
turn off. The vehicle may need to be
driven for up to 20 minutes at a speed
between 15 MPH (25 km/h) and 80
MPH (130 km/h) in order for the TPMS
to acquire and process the updated
information.
In case of replacement of wheel rims
and/or the relative valve with TPMS
sensor, or if the wheel arrangement is
changed, when reusing the vehicle it
may be necessary to wait 20 minutes
for the TPMS to acquire and process
the new components and/or the new
configuration.
Tire Pressure System Fault
Your vehicle has also been equipped
with a TPMS malfunction indicator
to indicate when the system is not
operating properly.
The TPMS malfunction indicator is
combined with the low tire pressure
telltale. When the system detects a
malfunction, the telltale will flash
for approximately one minute and