Maserati MC20 2022, Руководство пользователя

Страница: 153 / 288

4
149
Instruments and Controls
Daytime Running Lights (DRL)
DRL are activated using the lights
switch as previously described in the
table.
DRL are activated in AUTO mode
during day time.
The use of low beams deactivates the
DRL to activate parking lights.
During night time, the use of AUTO
mode deactivates the DRL to activate
parking lights.
Together with the DRL lights are also
turned on the number plate lights.
NOTE:
In countries where DRL use is not
required, these lights can be switched
off.
Low and High Beam Lights
Low beam lights can be switched on
manually or automatically in AUTO
mode based on the ambient brightness
detected by the twilight sensor. Both
modes are activated using the lights
switch as previously described in the
table.
With low beam lights switched on
manually or automatically in AUTO
mode, the high beam lights can
be switched on pushing the left
multifunction lever towards the
instrument cluster.
With high beam lights on, the
blue indicator light on the 5b area of
the instrument cluster will come on at
the same time.
The high beam lights are switched
off by pushing the left multifunction
lever again. The
indicator light
switches off on the instrument cluster.
Twilight Sensor
This is composed by an infrared LED
sensor on the windscreen that works in
conjunction with the rain sensor. It is
able to detect variations in the outside
light level based on the light sensitivity
set through the MIA system (see
“Customer Programmable Functions”
in section “Instruments and Controls”).
The twilight sensor sensitivity can be
adjusted according to 3 levels:
• level 1: minimum sensitivity;
• level 2: average sensitivity;
• level 3: maximum sensitivity.
The higher the sensitivity set, the
lesser is the external light variation
needed to switch the lights on (e.g.
with a setting on level 3 at sunset the
headlights come on earlier than levels
1 and 2).
The functionality of the twilight sensor
is essential for the management of the
external lights when the AUTO mode
is selected.
Blinking
The flashing of the high beam
lights is activated by pulling the left
multifunction lever towards the
steering wheel, the lights remain on
while you are operating the lever.
Rear Fog Light
The rear fog light switch is beside the
lights switch. Press it to switch the rear
fog light on: the amber backlight on
the switch light on.
The
amber rear fog indicator
light is displayed on instrument cluster
when function is enabled.