IS 25T - IS30T - IS34T
50 Hz
- 17
GB
GB
3.3.3 Data sheet IS 34
(QJLQH
50 Hz
Model
Yanmar 4TNE98
Type
Diesel 4 stroke
Cylinders (nr.)
4
Cylinder block material
Cast iron
Bore (mm. - in.)
98
Stroke (mm.- in.)
110
Displacement (cc. - CID)
2776
Power (hp)
39
RPM
1500
Compression ratio
18:1
Combustion system
Direct injection
Engine head material
Cast iron
Speed governor
Centrifugal mechanical
Lubrication system
Forced
Oil sump capacity with filter(l -gl)
10.2
Engine stop system
Stop solenoid
Fuel pump
Mechanical
Prevalence max pomp fuel
80
Fuel consuption (l/h - gl/h)
10,8
Air intake (l/h - gl/h)
2500
Starting battery (Ah - V)
80 - 12
Battery charger (A-V)
40 - 12
Starter (kW-V)
2.3 - 12
Max. inclination
30°
Water pump flow (l/min. - gl/min.)
40
$OWHUQDWRU
50 Hz
Type
Synchronous, 4-poles,
brush less self-excited
Regulation
Electronic
Cooling
Air/water ( Intercooler W/A )
Voltage (V)
400
Frequency (Hz)
50
Amps
52,3
Max. power (kW / KVA)
28,96 / 36,2
Continuous power (kW / KVA)
26,96 / 33,7
Power factor (cos ø)
1 - 0,8
Insulating class
H
Voltage stability
±2%
Frequency stability
±5%
4 SAFETY REGULATIONS
4.1 General precautions
Before starting the generator and before starting any
lubrication or maintenance operation, it is indispensable for
the staff responsible to read and understand all the
WARNINGS and all the CAUTION and DANGER indications
listed in this manual and in the supplementary documentation
furnished.
Nevertheless, the manufacturer cannot foresee all the
possible circumstances which may lead to potential risks
in the effective conditions of use of the generator.
Any operations and/or procedures for maintenance not
expressly recommended or indicated in the user manuals
must always be notified to and approved by the manufacturer.
In the event that a procedure not specifically recommended
needs to be applied, the user is responsible for assuring
that such procedure is safe and does not cause harm to
persons or things.
The manufacturer declines all responsibility for damage to
persons or things deriving from inobservance of the safety
regulations.
Carefully examine the safety warning plates on the machine
and respect the relevant instructions.
- Do not permit incompetent persons or without adequate
training to use the generator.
- Do not permit children or animals to approach the
generator when it is in operation.
- Do not access the generator with wet hands, since it is
a potential source of electric shock if improperly used.
- Any inspections of the generator must be carried out with
the engine off. Inspections with the engine on are to be
carried out by specialised personnel only.
- Do not inhale the combustion smoke since it contains
substances hazardous to health.
- Use the generator with the access doors closed.
- Never touch the engine or alternator body with the hands
when the generator is running or still hot.
- When carrying out maintenance operations on the
generator, disconnect the negative pole of the starter
battery to prevent accidental starting.
- In the event of oil or fuel leaks, clean off thoroughly
to prevent creating fire hazard conditions.
- In the event of fire, use a homologated fire extinguisher
never use water.
- Do not allow access to persons wearing a pacemaker
because of possible electromagnetic interference
with the device.
Should any problem arise or should
you have any questions, please contact the Mase
SERVICE department.
