15
OPERATION
Danger when reversing.
l
Choke on engine is open.
Fig. 10
l
Throttle lever 1 (Fig. 10) in position "I"
(detent for travel position).
l
Choose the desired travel direction by
means of the travel control lever (2).
Position "A" = forward(infinitely)
Position "B" = reverse (infinitely).
! Danger
Operate the travel control lever only slowly,
as otherwise the machine will drive jerkily
and the steering rod will hit up or down.
l
When releasing the travel control lever it
will slowly return to "0"-position. The
machine is braked automatically.
2.7 Driving the machine with the backup
protection bow
F
ig. 11
l
If the operator is pressed against an
obstacle during reverse travel, the backup
protection bow 2 (Fig. 11) is forced to
forwards travel.
! Danger
Do not use the machine if the safety control is
defective.
2.8 Switching the vibration on resp. off
i Note
Vibration at standstill causes transverse ruts in
the surface, therefore:
Switch the vibration on only when the machine
drives.
Switch the vibration off before the machine
stops.
! Caution
Never switch the vibration on when the
machine is on hard (frozen, concrete)
ground.
Possible bearing failures!
1
2
2
A
B
2
1
