10
Transportation
1. Shutdown engine for transportation.
2. For transportation, tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.
3. Drain fuel for transportation over long distance or bad road.
4. Secure machine firmly to prevent it from moving or tipping.
5. Rammer should be transported in such position as it is placed on level ground. In case of it must
be laid down for transportation, drain fuel tank as well as carburetor and make sure that oil plug is
tightened securely.
6. Direction to lay down the rammer, must be such that air cleaner comes to top. After laying it,
make sure that there is no leak of oil or residual fuel.
7. Make sure lifting device has enough capacity to hold machine (see identification plate on
machine for weight). Use central lifting point (a) when lifting machine.
8. Use trolley kit (supplied as optional) for short distance transportation.
Troubleshooting Guide
A. Rammer Troubleshooting
SYMPTOM
POSSIBLE PROBLEM
SOLUTION
Engine rotates
but amplitude
not uniform or
does not strike
Operating speed of throttle
lever is incorrectly set?
Set throttle lever to correct position.
Oil in excess?
Drain excess oil. Bring to correct level.
Clutch slips?
Replace or adjust clutch.
Spring Failure?
Replace spiral spring.
Speed of engine improper?
Adjust engine speed to correct operating RPM
setting.
