3
1
. , - ? ! ' @ : 1
2
A B C 2
3
D E F 3
4
G H I 4
5
J K L 5
6
M N O 6
7
P Q R S 7
8
T U V 8
9
W X Y Z 9
0
0
NOTE:
To leave space press “0” for once.
2.5
ENTERING MENU SETTINGS
In standby mode push any button and see the menu to enter apartment
number. Enter any apartment number, press the “C” button continuously till the
words “Settings PIN” are displayed then you can enter settings PIN and make the
necessary changes. The default PIN is “0000”. (It is strongly recommended to
change “Settings PIN” and store it carefully.) If you don not press any button
within 6 seconds, panel switches to standby mode then need to re-enter Settings
Menu.
You can press the numbers “1 to 9” to enter sub-menus on “Menu Settings”.
By using the UP and DOWN buttons you can select sub-menus.
2.5.1. ENTERING BUILDING NAME ON OPENING SCREEN
Opening Screen menu is #1 on Settings Menu. As optional building name or
Welcoming message is typed. (Example: “Welcome to xXx Building”) To enter the
menu, enter menu settings first, press “1” then press CALL. Type your message in
Line1 then press the CALL to type in Line 2. If you want to leave the Line 2 blank
just press the CALL after entering Line 1 Message. Each line has 16 digits to use.
2.5.2. IDENTIFICATION OF APARTMENT (APARTMENT) QUANTITY
(IFQ)
IFQ menu is #2 on Settings Menu. This menu limits the panel on use of the
apartment quantity. To enter the menu, enter menu settings first, press “2” then
press CALL, type total apartment quantity and press CALL to save it.
NOTE:
Apartment quantity can be maximum 255. Please pay attention not to leave
quantity “0”.
when you enter IFQ menu.
2.5.3. NAME LIST
Name List menu is #3 on Settings Menu. It is possible to display who the
resident at referred apartment number is. Visitors can browse the residents via the
UP, DOWN buttons then press the CALL to call the required apartment. To edit the
