2
The Digital panel default setting is for 1 building and up to 255 apartments. The
panel does not require presetting. It is activated and ready to use.
However, it is strongly recommended that you change default settings after
installing the panel. You can find how to change the settings on the instruction
manual. After reading the manual, you will be fully aware how to use this device.
2.
Device Instructions
2.1 CALL
In standby mode push any button, enter the apartment number and then push
the CALL button. If you do not know the apartment number, find the name of the
resident via searching the UP, DOWN buttons. Then, press the CALL. To call
guard, press the GUARD button.
2.2 DOOR ENTRY
A set of four numbers called as PIN. Each apartment has its own PIN or
apartments have shared PIN to open the building entrance. (For your safety do not
share your PIN with others.)
In standby mode push the C button until the words “Enter Your PIN” are
displayed and enter the four digits door release PIN within 12 seconds. Otherwise
the system will resume to standby mode. (Note: The default PIN is 1234) The PIN
would not appear in the screen, for that reason enter the PIN carefully. If there is a
mistake, reset the PIN by pressing the C button and enter the PIN again or enter the
rest of the digits to complete the set to four digits then you can enter again.
2.3 USE OF THE BUTTONS IN ABC MODE
In ABC mode; to type the requested letter, press relevant button:
To choose first letter, press once
To choose second letter, press twice
To choose third letter press, three times
EXAMPLES
: To display "C" press the #2 three times, to display “K”, press the #5
three times quickly. This method is called single key mode with many options.
NOTE:
When you press another button cursor moves to next digit. To move onto
right cell on the display or to be able to enter the same letter again wait for few
seconds after entering the first letter. For more information about the characters,
you can use table on menu 2.4.
2.4 SYMBOLS
BUTTON DISPLAYED
