MAS 640 Series, Инструкция по эксплуатации

Страница: 10 / 20

MAS 640 Instruction Manual Rev. 0A
4.8. Weighing with Tare
Place the empty container on the weighing platform and press the <TARE> key. Instrument will cancel a
container mass by displaying zero.
On the main display, after canceling a container mass, the
net LED will light up just above the <TARE>
key to indicate the Net weight readings.
To cancel tare effect press the <TARE> key once instrument's readings are zero or below zero.
4.9. Printing/transferring data

Press the <PRINT> key.
The display contents are printed out or transferred to a computer.
Refer to the section 5.5 for the available printout options.
Note:
Unstable readings will not be printed out or transfered to a computer.
5. Special Functions
5.1. Special Function Keys
Special functions are accesed through the Operation Keys.
Follow the symbol under each Operation Key to recognize its additional function.
5.2. Counting

Place the container on the weighing platform and press the <TARE> key if needed.

Place the known number of sample pieces to be counted into the container.
Note: The greater sample number and weight, the more accurate are the counting results.

A long press the <PIECES> key, then set the number of sample pieces to be loaded with the <TARE>,
<ZERO> or <PIECES> keys, according to the arrow markings under each key.

Accept changes by pressing the <FUNCTION> key.

Read the number of peaces after stab annunciator lit.
To exit counting mode short press the <PIECES> key. Unit will go back to the weighing mode.
Note: Once the number of sample pieces is stored by the unit memory there is no need to load the sample
pieces again until a different item is to be counted.
User can simply toggle between counting mode and weighing mode by short pressing the <PIECES> key.
If there is no sufficient load of sample pieces during counting mode unit displays the message error -E08-.
-10-