Adjustments
M
Z
010
English
5
97
5.2 Rebound adjustment with external
adjustable pumping rod
When turning the adjustment knob (
D
) located
on the bottom of the fork’s leg, you can adjust
the damping during the rebound phase.
By turning on the adjustment screw you can
modify the hydraulic configuration of the inner
valves: this means that there will be more or less
oil flowing through the valve.
• When turning the adjuster clockwise, you will
increase the rebound hydraulic damping,
making the fork slower during the rebound
phase.
• When turning the adjuster counterclockwise,
you will decrease the rebound hydraulic
damping, making the fork more responsive
during the rebound phase.
ATTENTION
Do not force the adjustment knob (D) past its
limits.
5.3 Rebound adjustment with internal
adjustable pumping rod
You will find some damping rods where the
rebound adjustment is located inside the
stanchion tube.
To adjust these forks, you will need to:
• remove the dust cap (
A
) located on the top of
the fork’s leg.
• insert the supplied hexagon rod (
B
) into the
stanchion tube, making sure to center the
adjustment seat (
C
).
• When turning the adjuster counterclockwise,
you will increase the rebound hydraulic
damping, making the fork slower during the
rebound phase.
• When turning the adjuster clockwise, you will
decrease the rebound hydraulic damping,
making the fork more responsive during the
rebound phase.
ATTENTION
Do not force the adjuster (C) past its limits.
MZ
0010
15
D
MZ
0
10017
A
MZ
009
017
B
C
Содержание QR20 Plus
