Assembling: Assembling the top right cap
Put the fork in the vice in vertical position, fixing it by the dropouts.
Check that O-ring is not damaged.
Using the 21mm socket spanner, tighten cap (
2
) to the recommended tightening torque (
10 Nm ± 1
).
Restore the correct air pressure (see settings).
Fit the protection cap (
1
).
Assembling: Assembling the top right cap
Put the fork in the vice in vertical position, fixing it by the dropouts.
Check that O-ring is not damaged.
Using the 21mm socket spanner, tighten cap (
2
) to the recommended tightening torque (
10 Nm ± 1
).
Restore the correct air pressure (see settings).
© Marzocchi Suspension
2005
-
MX Comp ETA
