Monster
T
Nm
20
23
29
Nm
6
29
23
FIG. H
Tighten the wheel shaft
(23)
counter clock-
wise from the opposite end with a 8-mm
Allen wrench. Tighten to 20 Nm.
FIG. I
Compress the fork several times so the
sliders will become properly seated onto
the wheel shaft. Lock the pinch bolt
(29)
on
the r.h. lug to 6 Nm.
DISASSEMBLY
To remove the wheel proceed as follows:
– loosen the bolt
(29)
on the r.h. drop-out;
– screw the wheel shaft
(23)
clockwise
onto the l.h. drop-out (see
FIG. H
);
– remove the shaft
(23)
from the opposite
side (see
FIG. G
).
FRONT WHEEL FIXING
IMPORTANT:
for a safe and proper per-
formance of this fork and all related de-
vices, the front wheel should be absolutely
secured as specified in the instructions given
below.
FIG. G
Insert the complete wheel assembly be-
tween the sliders and fit the wheel shaft
(23)
into the slider that accommodates the
wheel shaft pinch bolt
(29)
from the right
hand side.
Rotate wheel shaft clockwise to start it into
the LH slider.