M
A
R
A
T
H
O
N
D
32
D
D1
C
C
D
21
28
D
D1
C
C
28
1
3
2
ADJUSTMENTS
FORK LEG PRESSURIZATION
Pump air through the valves to set COM-
PRESSION damping, as indicated in the
figure. To change the pressure inside the
fork legs, remove the protection cap
(32)
(LH fork leg), remove plug
(21),
turn knob
(28)
until you can see the valve under it (RH
fork leg). Depressurize each leg by pushing
lightly on valve pin. Fully tighten adapter
fitting
(D)
supplied with the fork, on a
M
ARZOCCHI
pump
(C)
. Screw fitting end –
with O-ring
(D1)
on valve, and pressurize
until the required value is reached. Un-
screw the fitting/pump assembly and refit
the cap
(32)
.
IMPORTANT:
inflate using the special
M
ARZOCCHI
pump with the proper pressure
gauge. Use of improper tools or other
procedures than specified ones might lead
to improper inflating.
NOTE:
in case of air leakages when adapter
fitting
(D)
is fitted, ensure that the O-ring
(D1)
is not damaged.
REBOUND ADJUSTMENT
(r.h. fork leg)
The right fork leg is equipped with an
Extension Control Cartridge adjuster knob
(28)
for REBOUND damping up to max.
rebound damping - “Lock Out”. Turning this
adjuster into the cartridge rod, changes the
hydraulic setting of the inner valves.
You can have three adjustments:
Pos. 1: “Lock Out”
Turn the knob completely counter-clockwise
to obtain full ECC lockdown (maximum
rebound damping) for steep climbs and
road riding.
Pos. 2: “Intermediate rebound
damping”
Turn the knob clockwise until hearing the
first click. This mediuam position offers slow
rebound damping for fast starts and rough
climbs.
