Jr T
Q
R
2
0
ADJUSTMENT
SPRING PRELOAD (FIG. I)
Spring preload can be adjusted by turn-
ing the knob (2) on the top of the fork legs.
When supplied, Jr.T is preloaded at its
minimum level, i.e. adjustment knob com-
pletely unscrewed counterclockwise. How-
ever, springs are slightly preloaded to
counteract static loads during COMPRES-
SION. By turning the adjuster knob clock-
wise, the preload is increased up to the
maximum value equal to 15 mm spring
preload. This adjustment is essential in
order to have the right Jr.T response in
accordance with the rider’s weight and
riding style.
2
REBOUND DAMPING ADJUSTMENT
(FIG. L)
The adjuster controlling REBOUND damp-
ing adjustment is accommodated inside
cartridge rod (11) inside each fork leg.
To access the adjuster, unscrew the top
caps (37) and push the stanchion tubes
fully down (see Fig. 1).
Slide out the pre-load sleeve (1). Fit the
supplied hexagon rod (C) into the stan-
chion tube and into the adjuster inner
hole. Rotate the adjuster clockwise for
harder damping, counterclockwise to sof-
ten it. Refit the cap (37) and tighten it to the
specified torque (see fig. 25).
WARNING:
Do not remove the
springs or this will alter the amount
of oil inside the fork legs.
C
