manualshive.com logo in svg

Marzocchi Jr. T, Руководство пользователя

Поделиться
Скачать
Marzocchi Jr. T Скачать руководство пользователя страница 5

Jr T

Q

R

2

0

RECOMMENDATIONS FOR
MAINTENANCE

MARZOCCHI forks are based on ad-
vanced technology, supported by year-
long experience in the field of profes-
sional mountain biking. In order to achieve
best results, we recommend to check and
clean the area below the dust seal and the
stanchion tube after each use and lubri-
cate with silicone oil.

INSTALLATION

Installing the Jr.T fork on a bicycle is a very
delicate operation that should be carried
out with extreme care.
A threadless steer tube is pre-installed on
the fork from the factory. It will need to be
cut to the required length for a proper fit.
Always have the installation checked at
one of our Technical Service Centers.

WARNING: 

“A-Head Set” head-

set/Steering tube mounting and

adjustment must be carried out in compli-
ance with the headset manufacturer’s in-
structions. Improper installation may jeop-
ardize the safety of the rider.
Have steer tube replaced at an authorized
Technical Service Centers only.

WARNING: 

In case of improper

installation of the steer tube into the

crown, the rider could lose control of his/
her bicycle, thus jeopardizing his/her
safety.

MOUNTING THE FORK ON THE
FRAME
FIG. A

Remove the upper plate (35) from steer
tube and fork legs by loosening the 3
fastening bolts (36).

35

36

Содержание Jr. T





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды