Insert the crown-stanchion unit (
3
) in the arch-slider assembly (
4
).
With the special 12mm spanner (
A
), tighten the right bottom nut (
7
) complete with O-ring (
8
) to the
recommended tightening torque (
10 Nm ± 1
).
Fit the rebound adjusting knob (
6
) to the right leg.
Take great care not to damage the O-ring fitted to the end of the pumping element rod.
Tighten the fixing screw (
5
) of the adjusting knob to the recommended tightening torque (
2 Nm ± 0.5
).
Using the special 12mm spanner, tighten the left bottom screw (
1
) complete with O-ring (
2
) to the
recommended tightening torque (
10 Nm ± 1
).
© Marzocchi Suspension
2006
-
DJ Urban
