Dismantling: Breaking down the pumping element
Remove the bottom pad (
1
) from the pumping element rod.
Pull the pumping element (
3
), spacer (
7
) (
only for models with 100mm travel
), the rebound spring (
4
),
bush (
5
) and the bottom washer (
13
) off the top of the fork.
Dismantling: Removing the seals
Prize the dust seal (
1
) off its seat with a small flat-tip screwdriver.
Take great care not to damage the internal surfaces of the one-piece assembly while
removing the dust seal.
With the same screwdriver, prize off the metal stop ring (
2
).
Take great care not to damage the internal surfaces of the one-piece assembly while
removing the stop ring.
© Marzocchi Suspension
2005
-
Dirt Jam Comp
