Putting into Service
Operating Manual
12
5.2.2 Establishing an RS-232 connection
Note:
To be able to use the port
AUX mini
as an RS-232 interface, you require a special RS-232 cable.
Please contact our Customer Service Center in this case.
1
Disconnect the controller from the power supply.
2
Switch the PC off.
3
Connect the port
AUX mini
on the controller to a serial port on your PC.
Use the RS-232 interface cable for this.
4
Switch the PC on.
5
Connect the controller to the power supply.
The controller is now connected to the PC and ready for operation (
manual mode
and
automatic mode
).
If you are not programming the controller via the software provided by Märzhäuser Sensotech
(SwitchBoard, DLL files), make sure that your RS-232 interface is configured correctly.
57,600
Baud
11 bit frame
1 start bit
8 data bits
2 stop bits
Check the connection of the PC with the controller using the
ver
instruction, for example.
The controller sends the version number back as the feedback value.
Note:
Further instructions can be found in the instruction set documentation (
Instruction Set of the TANGO
Controller
). The instruction set documentation can be found in the download section of the Märzhäuser
website at
www.marzhauser.com/downloads
.
5.2.3 Establishing a CAN connection
The CAN interface is a customer-specific interface.
You are welcome to contact our Customer Service Center if you have any questions.
