3 of 6
v1.2
Removing the Power Supply
1.
Disconnect the ATX plug connector(s) from the backplane. Note Figure 4 above.
2.
Disconnect the PPC power supply connector(s) from bridge board(s). Note Figure 5
below.
3.
Disconnect the power supply from all peripherals and remove any nylon tie wraps that
are used to secure the cables to the bottom panel of the chassis.
4.
Remove the screws holding the power supply to the panel. Keep the screws and any
standoffs for later use.
Figure 5:
GX7070 Backplane Bridge Connector
